SW6.3 Series Screws
Scope of Application
The SW6.3 series screws are designed for use with U-shaped battens, edge trim battens, gaskets, and sleeve products.
Technical Advantages
Features a self-drilling point, reverse design for fast and labor-saving drilling, significantly enhancing screw pull-out resistance and vibration-resistant performance
Technical Parameters
Item | Detail |
Thread Diameter | 6.3mm |
Screw Length | 32/50/75/90/105/125/135/140/150/160/180/200/230mm |
Drive | T30 Torx |
Thread | Self-Tapping Reverse-Thread |
Screw Material | Carbon Steel |
Pull-out Strength (0.8 mm Steel Plate) | ≥800N |
Corrosion Resistance | 1500 h Neutral Salt Spray, 15 Cycles Acid Rain Test |
Drilling Capacity | Steel Plate Thickness 0.63-1.25 mm |
Compliance Standard | JG/T 576-2021 |
