-
Large-Hole Non-Penetrating Gasket
Suitable for single-ply roofing systems when fastening TPO/PVC waterproof membranes on soft substrates, such as rock wool insulation layers.
-
Nylon Sleeve Non-Penetrating Gasket with Matching Sleeve
The nylon sleeve is specifically designed for use with large-hole non-penetrating gaskets, together forming a perforation-free fastening solution for rock wool insulation substrates in mechanical fixing systems.
-
Type K Gasket Rigid Insulation Fixing Gasket
Used for fastening various single-ply roofing membranes including TPO, PVC, SBS, and KEE, installed over common insulation layers such as XPS, PIR, or EPS. A recommended membrane overlap width of 120 mm should be maintained.
-
Type C Gasket Rigid Substrate Fixing Gasket
Suitable for fastening TPO/PVC waterproof membranes on rigid substrates such as concrete, cement fiberboard, and gypsum board.
-
D60 Claw Gasket Rigid Insulation Fixing Gasket
Used for fastening various single-ply roofing membranes including TPO, PVC, SBS, and KEE, installed over common insulation layers such as XPS, PIR, or EPS. A recommended membrane overlap width of 150 mm should be maintained.
-
D50 Nylon Gasket Alkaline-Resistant Rigid Substrate Fixing Gasket
Suitable for fastening PVC/TPO waterproof membranes on alkaline substrates prone to corrosion, such as glass-magnesium panels, calcium silicate boards, and gypsum boards.
-
D40 Gasket Rigid Substrate Fixing Gasket
Suitable for fastening TPO/PVC waterproof membranes on rigid substrates such as concrete, cement fiberboard, and gypsum board.
-
Type III Edge Trim Batten
Suitable for fixing membrane terminations and flashings at locations such as parapets, skylights, ventilation bases, and eaves.
-
Type II Edge Trim Batten
Suitable for fixing membrane terminations and flashings at locations such as parapets, skylights, ventilation bases, and eaves.
-
U-Batten with Staggered Hole Pattern
Suitable for reinforced perimeter fastening around openings larger than 500 mm in PVC/TPO membrane systems, including parapet bases, gutter corners, roof ridges, skylight perimeters, and equipment curbs.
-
U-Batten with Uniform Holes
Suitable for reinforced perimeter fastening around openings larger than 500 mm in PVC/TPO membrane systems, including parapet bases, gutter corners, roof ridges, skylights, and equipment curbs.
-
U-Batten with Claws
Suitable for reinforced perimeter fastening around openings larger than 500 mm in PVC/TPO membrane systems, including parapet bases, gutter corners, roof ridges, skylight perimeters, and equipment curbs.